Or lights, at least
In this post, I’m going to do a walkthrough of creating a very simple Gadgeteer prototype. It will not do a great deal, other than make some lights change when a button is pressed, but it will serve as an introduction to illustrate the Gadgeteer development process.
First, get a telegraph pole…
When I was a kid, I had a book called something like ‘Four thousand projects for inquisitive young minds’. Amongst the ideas for healthy, practical things to amuse children who should know better was a project called ‘Make your own totem pole’ (if you don’t know what a totem pole is, wikipedia will help). Anyway, the instructions began with something like ‘First, get an old telegraph pole…’, at which point the project became rather more difficult than a ten year old child could manage. And that’s before the talk of axes and chainsaws. The point of this rambling is that before you can start playing with the Gadgeteer hardware, there is some software you need to download and install. Rest assured that it’s easier to acquire and set up than a telegraph pole.
Continue reading “Buttons and bows”
Being by way of an introduction.
For many years, I’ve amused myself by building electronic devices. By far the most entertaining for me have been those which interact with the real world. I like stuff which moves things, senses things and generally behaves as if it had some magic in it. Since the advent of cheap microcontrollers, most of these projects have involved more programming and less electronics. I’ve had a lot of fun with PIC processors, which are dirt cheap. I particularly love the PICAXE, which is a pre-programmed PIC for which you can write code in a language similar to BASIC rather than diving into assembler. My other favourite is the Propeller. It’s an amazing chip with 8 cores, programmable in a higher-level language called SPIN. I’ve also dabbled with various embedded processors from Texas Instruments (if you like gadgets, check out the eZ430 chronos) and STMicroelectronics (try the unbelievably cheap STM8S-Discovery kit). There is also Arduino , of course (I’m glossing over that, because I’ve never actually used one).
All of these are capable devices in their own niches, and if you program them down to assembly language level, you can get quite a lot of performance out of them. I don’t want to program in assembler very much. It’s painful. Fortunately, there are other options.
Continue reading “Getting going with Gadgeteer”